UAZ 2001 ???-3909 Instruction Manual download pdf (Page 79)

SPECIAL TOOLS AND APPLIANCES

New automobiles delivered from the manufacturing plant are

provided with a set of tools and appliances. Use this set for

maintenance and simple repair of the automobile en route.For

convenience of storage, there are two tool bags in the automo-

bile: a big and a small one.

Use a plunger grease gun (Fig. 69) for lubricating the

automobile assemblies provided with nipples.

For lubricating, pull the handle 12 until the stud 13 touches

the piston 7; by rotating the handle insert the stud through slot

of the piston and by rotating the handle lock the stud in the

piston, fit the head 1 over a nipple. When rocking the lever 8,

press the handle 12.

Fig. 69. Grease plunger gun:

1 -head; 2 -spring; 3 -ball valve; 4 -body; 5 -plunger; 6 -gasket; 7 -piston;

8 -lever; 9 - gun cylinder; 10 -rod; 11 - cover; 12 -handle; 13 -stud

Fill the gun with grease in the following sequence:

1. Screw the cylinder 9 out of the body 4.

2. Pull the piston 7 inside of the cylinder through 1/5 of

strokes by means of the handle 12.

3. Using a wood spatel, fill the gun cylinder with grease.

Then press the pistion against the stop and fill the whole cylinder

with grease. Make sure, there are no air bubbles in the cylinder.

The gun fails to be operated if air would find its way into the

chamber B.

For deaerating, unscrew the bolt of the cylinder C, press the

gun handle until grease is emerged and tighten the bolt.

The capacity of the chamber B is 340 cm

of grease.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 111 112

No comments

UAZ 2001 ???-3909 Instruction Manual Page 79